A crystal clear swimming pool increases your enjoyment of having a pool, but it can only happen with regular swimming pool maintenance. To keep your pool clean and clear there are tasks that you have to do everyday, as well as seasonal maintenance checks. You can find all the tools and equipment you need to maintain your pool in many online stores.
Equipment for maintaining swimming pools help keep the pool clean and clear. Pool manufacturers recommend the regular use of specific tools to keep the water safe for swimming. Without proper maintenance, swimming pools can become dirty or contaminated.
Some of the things you’ll need to keep the pool clean include a pool filter, vacuum, and skimmer. Chlorine tablets prevent the growth of algae that can turn the water cloudy or greenish. To maintain an in-ground swimming pool, you will also need some pumice stones and brushes to clean the tiles.
Daily Tasks
Run the pool filter at least 8 hours a day, or as recommended by the manufacturer. It is best, however, to keep the filter running 24 hours a day.
Use a pool skimmer to remove floating leaves and debris. Empty your skimmer baskets and clear them of leaves and debris.
Add chlorine to the pool daily. You can use a chlorine floater with chlorine tablets inside. You can also place slow-dissolving chlorine tablets in the skimmers or filter once a week.
Weekly Swimming Pool Maintenance
Vacuum the pool to remove dirt from the bottom. Pool vacuums come in automatic or manual models.
Use a brush or pumice stone to scrub the tiles along the waterline. This is where deposits tend to form.
Swimming pool maintenance experts recommend adding a dose of Algae Preventative to discourage the growth of algae.
Use a pool cover if the pool will not be used for an extended period of time.
Regular Equipment Check
Check your pool maintenance equipment regularly to make sure they are in good working condition and to correct small problems before they get worse. Clean out the swimming pool’s skimmer basket and empty the contents into a trash bag.
Open and clean out the pump strainer basket. After cleaning the skimmer and strainer basket, check the filter and see if it also needs cleaning. You may also have to replace the filter. It’s important to check the condition of the machinery and pool equipment on a monthly basis.
Water Test
Every two to three weeks, test the swimming pool water. The water’s pH level should be between 7.2 and 7.9 to keep it clean and clear. Water test strips will show the levels of chlorine and pH level in the pool. Free available chlorine level should be at 1.0-3.0 ppm. If the chemical levels are not maintained, algae can grow. This can lead to water that appears cloudy, green, black or brown. Proper and regular maintenance is the only way to keep your swimming pool crystal clear.